Scaling fastening manufacturing for the next generation of offshore wind

5 minutes

Offshore wind's next generation is already taking shape. Turbines rated at 15 MW are being installed, individual wind farms are being developed at gigawatt scale, and floating technologies are opening up deeper waters to commercial development.

The pace of change is significant. According to the Global Wind Energy Council (GWEC), global installed offshore wind capacity reached 92.5 GW in 2025, with forecasts suggesting it could grow to approximately 420 GW by 2035.  

The average capacity of turbines installed during 2025 was 10.3 MW, exceeding 10 MW for the first time.  

The developments in the sector present new demands for manufacturers supplying safety-critical components serving it.  

Larger turbines require increasingly sophisticated fastening solutions, major projects depend on consistent production at scale, and floating structures introduce different engineering challenges.

‍

Larger turbines, changing fastening requirements

The Vestas V236-15.0 MW turbine illustrates the scale of modern offshore wind technology. With a 236-metre rotor diameter, 115.5-metre blades and a 30-year design life, it represents a substantial engineering undertaking.

As turbine dimensions increase, tower and foundation connections must be designed to accommodate the loads and operating conditions of each installation. This places greater demands on fastener design, from the size and strength of the components to their resistance to fatigue and corrosion.  

CTB Group has expanded its UK manufacturing capabilities to produce large-diameter fasteners up to M100, supporting the development of these increasingly substantial wind energy structures.

Our work on Poland's Baltic Power offshore wind farm demonstrates how these requirements translate into manufacturing activity.

The 1.2 GW project comprises 76 turbines rated at 15 MW each. As part of our involvement, CTB Group helped develop a high-performance fastening specification incorporating an advanced surface coating for offshore applications and supplied approximately 1,000 tonnes of stud assemblies in the M36–M72 range, complete with clamp-load measuring systems. The specification achieved DNV and DIBt certification.

‍

Manufacturing at the scale offshore wind requires

The scale of offshore wind developments has increased considerably. When London Array opened in 2013, its 630 MW capacity made it the world's largest offshore wind farm. Today, the UK's Dogger Bank project is being developed with a planned capacity of 3.6 GW – almost six times greater. As projects grow, manufacturers must deliver safety-critical components at scale, combining production capacity with consistent quality, material traceability and reliable delivery schedules.

CTB Group's investment in automated manufacturing provides a practical example of how production capability is evolving.

At the Rotherham facility, a fully automated cell manufactures up to 500 anchor studs in a nine-hour shift for onshore wind applications. The line currently produces M36 and M42 studs measuring three to four metres, integrating cutting, engraving, chamfering, threading, wrapping and packing.

Each stud receives an engraved heat code that allows its material characteristics and origins to be traced throughout its service life.

The facility plans to extend the line's capabilities into the M52 range in response to increasing turbine dimensions. Although the cell currently serves onshore wind, it demonstrates an established approach to high-volume manufacturing that is relevant to the wider industry's capacity challenge.

CTB Group's investment in large-diameter manufacturing and certified fastening systems provides more direct evidence of our response to changing project requirements for offshore applications.  

‍Floating wind introduces new engineering demands

Floating offshore wind is extending development into waters where conventional fixed-bottom foundations are less practical.

Norway's Hywind Tampen provides an operational example. Located approximately 140 kilometres offshore in water depths of 260–300 metres, the project comprises 11 floating turbines with a combined capacity of 94.6 MW. Its concrete floating structures use a shared anchoring system.

Unlike fixed-bottom structures, floating platforms move in response to waves, wind and currents. Their connections must therefore be assessed against the dynamic loads and fatigue conditions associated with the selected platform design.

CTB Group has received funding from the Offshore Wind Growth Partnership to develop advanced large-diameter fasteners specifically for floating wind applications. The work focuses on the mechanical demands placed on fastening systems in these dynamic conditions and this product development work represents a further area of technical investment for our group.  

‍

Manufacturing for the next phase of offshore wind

As the GWEC note, with a compound annual growth rate of 24% between 2026 and 2030, offshore wind is set to become one of the world’s fastest growing technologies.  

And as offshore wind projects grow in scale and technical complexity, fastening manufacturers must be ready to meet changing engineering and production requirements.

CTB Group is investing in that capability through large-diameter manufacturing, certified fastening solutions, automated production and ongoing development of fastening systems for floating wind.

Planning your next offshore wind project?

Talk to our team.  

Share this post